Middle Teeth (3.0mm, 3.5mm)
Middle Teeth
Below 240mm length saw with 3.0/3.5mm gap between the teeth ( M type) is
multi purpose and recommended for cutting less than 10 cm diameter branches.
Impulse Hardened Teeth
Hardness: 900HV - 950HV (HRC 67 - 68 degrees) Impulse hardening: The razor sharp edges combined with impulse hardening make for the teeth that will last three times longer than conventional teeth and it is most suitable for cutting tough dry wood.
Friction Minimized
Cross-section of saw blade showing relationship between blade and material being cut. Friction is minimized by the tapering of the blade.